Fixing common problems that occur with storm doors.
Storm doors are often made with flimsy parts, including the
latch, hinge, and closer. Fortunately these parts are easy to replace. However,
you may find it worthwhile to replace the entire storm door with a
more substantial and weather-resistant one if it has several problems.
Most parts can be found at a home center. If you
do not find the part you need, try searching Internet sources.
Prestart Checklist
Time
An hour or so for most repairs
An hour or so for most repairs
Tools
Screwdriver, drill, pliers
Screwdriver, drill, pliers
Skills
Basic mechanical skills
Basic mechanical skills
Prep
Check the door for binding and other obstructions that could be causing problems.
Check the door for binding and other obstructions that could be causing problems.
Materials
Replacement parts to match, spray lubricant
Replacement parts to match, spray lubricant
Spray the latch
Spray the latch and any moving parts -- including where
panes slide -- with lubricant to keep them in smooth working order.
Install replacement closer
Closers lose their dampening power over time. To
install a replacement closer, use a drill with a screwdriver bit
to attach the jamb-side bracket, then the screws that hold the closer to the
door.
Adjust closer tension
Adjust a closer to the correct tension by turning the
adjustment screw at the end of the cylinder.
Tighten piano-type hinge
Try driving longer screws if the long piano-type hinge comes
loose. You may need to drill pilot holes and drive them at an angle so they
catch solid wood.
Install wind chain
A wind chain keeps the door from blowing wide open, which
can damage the hinge. It installs easily with a few screws.